Monday, 30 December 2013
First camera - changes
This camera changed for the start of the movie, it was previously seen as the low angle camera but we raised it to eye line level pointing at Mitch and Megan in a two shot. Later when our two characters stumbled to the window, we changed camera 3 to a low angle shot and this camera stayed eye line and pointed at the window of Mitch and Megan
Camera 3/ battery problem
The camera had to be plugged in so that it could run in our shooting of our task. This is camera 3
Second camera different picture angle
Although this camera was pointing at the door, when we filmed it, it was pointing to the door just on the right of Mitch.Our third camera
Well this is where we placed our third camera it was towards the back which had a zoom up of Mitch falling of his chair when Megan approaches him, although we did have a little problem with this camera in being that it had no battery so we had to rearrange the camera settings to make sure this third camera was by a plug so that it could stay charging throughout our filming task.
Second camera
This is our second camera where by it would have a view of Megan bursting through the door.
Camera/ setting up
We then started to set up the cameras using different angles, low, high and eye line level, we also enforced the 180 degree rule. This was our previous low angle place but ended up moving it into a different place just before we started shooting the task.
Continuity task
At this present moment we have just scripted our continuity task and made some quick notes and
for our short clip on this topic.
Thursday, 5 December 2013
http://en.wikipedia.org/wiki/Continuity_editing
I found my definition on Wiki.
Subscribe to:
Posts (Atom)